Recent Updates

Pinned Items
Recent Activities
  • Earl Miller created a new site article, Duplicator D7 - 20 Microns
                This is a current list of tested resin profiles for the Wanhao Duplicator D7 at 20 micron layer height. Not all settings will be used across all slicers.   Refer to your slicer documentation for this information on which apply. Settings are tested on multiple machines to create averages and may not be exact for your machine. Regardless, it's standard practice as you are learning your machine to do calibrations and refinements, we provide these to get you "close" and hopefully de-mystify the relationships between some of them.       Manufactures are welcomed and suggested to get in contact with us to provide up to date information and get yours listed if not already in this program. Join the profiles group and let us know!    
    1. Continue Reading
    0
    0
    0
    0
    0
    0
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  • Earl Miller created a new site article, Duplicator D7 - 35 Microns
                This is a current list of tested resin profiles for the Wanhao Duplicator D7 at 35 micron layer height. Not all settings will be used across all slicers.   Refer to your slicer documentation for this information on which apply. Settings are tested on multiple machines to create averages and may not be exact for your machine. Regardless, it's standard practice as you are learning your machine to do calibrations and refinements, we provide these to get you "close" and hopefully de-mystify the relationships between some of them.       Manufactures are welcomed and suggested to get in contact with us to provide up to date information and get yours listed if not already in this program. Join the profiles group and let us know!    
    1. Continue Reading
    0
    0
    0
    0
    0
    0
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  • Earl Miller created a new site article, Duplicator D7 - 40 Microns
                This is a current list of tested resin profiles for the Wanhao Duplicator D7 at 40 micron layer height. Not all settings will be used across all slicers.   Refer to your slicer documentation for this information on which apply. Settings are tested on multiple machines to create averages and may not be exact for your machine. Regardless, it's standard practice as you are learning your machine to do calibrations and refinements, we provide these to get you "close" and hopefully de-mystify the relationships between some of them.       Manufactures are welcomed and suggested to get in contact with us to provide up to date information and get yours listed if not already in this program. Join the profiles group and let us know!    
    1. Continue Reading
    0
    0
    0
    0
    0
    0
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  • Over the next few days you'll notice some partially incomplete or outright wonky sections appearing in a new area, "Resin Profiles". Disregard it temporarily and do not rely on the information shown because alot of it is placeholder information until we get the actual data entered. I'll make an announcement when it is live and reliable.
    0
    0
    0
    0
    0
    0
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  • Earl Miller created a new site article, Duplicator D7 - 50 Microns
                This is a current list of tested resin profiles for the Wanhao Duplicator D7 at 50 micron layer height. Not all settings will be used across all slicers.   Refer to your slicer documentation for this information on which apply. Settings are tested on multiple machines to create averages and may not be exact for your machine. Regardless, it's standard practice as you are learning your machine to do calibrations and refinements, we provide these to get you "close" and hopefully de-mystify the relationships between some of them.       Manufactures are welcomed and suggested to get in contact with us to provide up to date information and get yours listed if not already in this program. Join the profiles group and let us know!    
    1. Continue Reading
    0
    0
    0
    0
    0
    0
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  • New University Student
    Being part of a community. To unlock this badge, you need to register on this site.
    0
    0
    0
    0
    0
    0
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  • tom thijsen just registered on the site
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  • tom thijsen joined the group, University Park
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  • New University Student
    Being part of a community. To unlock this badge, you need to register on this site.
    0
    0
    0
    0
    0
    0
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  • Roland Leister just registered on the site
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
Activities are currently restricted to members only.

Log in to see what's going on.
Unable to load tooltip content.
"It's a collaborative effort and vision of Wanhao's Gary Chen, myself, and a growing list of enthusiastic people who want to further the enjoyment and viability in business, education, and other areas of interest with 3D printing by offering useful resources and support to achieve this goal."          ~Earl Miller

Copyright © 2017-2018 Earl Miller, Wanhao and Wanhao University. All Rights Reserved. No part of this site may be reproduced without express consent by the owners for their respective content. Wanhao University is a creative IP (intellectual property) soley owned by Earl Miller.