Duplicator D7 - 50 Microns

header resin profiles bar d7
 
 
 
 
 
 
50 Micron Layer Height is the “middle” setting that is a good place for most models of any type, mixing descent speed and quality. Its also used to begin calibration with new resins so results are easier to read. 
 
This is a current list of tested resin profiles for the Wanhao Duplicator D7 at 50 micron layer height. Not all settings will be used across all slicers.
 
Refer to your slicer documentation for this information on which apply. Settings are tested on multiple machines to create averages and may not be exact for your machine. Regardless, it's standard practice as you are learning your machine to do calibrations and refinements, we provide these to get you "close" and hopefully de-mystify the relationships between some of them.
 
Duplicator D7 Resin Profiles - 50 Micron - Can be used in all the popular slicers.
RESINBURN IN LAYERSNORMAL LAYERSSpeedSlow Section (Optional)
Brand, Type, and ColorLayers. Thickness, Cure Time (ms)Wait Before Print, After Print, After Lift (ms) Lift After (mm)Thickness, Cure Time (ms), Wait BeforeWait After, Wait After Lift (ms), Lift After (mm)Lift Speed, Bottom Speed (mm/min)Height (mm), Lift Speed (mm/min)Bottom Speed (mm/min), Lift After (mm)
WanhaoSTDBlack550400005006507000000625400.525406
WanhaoSTDWhite550400005006507000000625400.525406
WanhaoSTDGrey550400005006507000000625400.525406
WanhaoSTDClear5506000050065015000000625400.525406
WanhaoSTDRed550400005006507000000625400.525406
WanhaoSTDYellow550400005006507000000625400.525406
WanhaoSTDOrange550400005006507000000625400.525406
WanhaoSTDGreen550400005006507000000625400.525406
MonocureRapidBlack550300005006505000000625400.525406
MonocureRapidWhite550300005006505000000625400.525406
MonocureRapidGrey550300005006505000000625400.525406
MonocureRapidClear550400005006506000000625400.525406
MonocureRapidGun Metal550500650000625400.525406
MonocureRapidRed550400005006508250000625400.525406
MonocureRapidYellow55035000500650000625400.525406
MonocureRapidBlue550450005006508250000625400.525406
MonocureRapidGreen550430005006508250000625400.525406
MonocureFlexClear550500650000625400.525406
Harz LabsSTDBlack550500650000625400.525406
Harz LabsSTDWhite550500650000625400.525406
Harz LabsSTDGrey550500650000625400.525406
Harz LabsSTDClear550430005006509500000625400.525406
Harz LabsSTDCherry550425005006508250000625400.525406
3D-OkaySTDBlack5505000050065013500000625400.525406
3D-OkaySTDWhite5505000050065013000000625400.525406
3D-OkaySTDGrey5505000050065013500000625400.525406
FTDSTDWhite5506500050065016000000625400.525406
FTDIBBlack5506500050065012000000625400.525406
FTDSTDSnow Wht550500005006509000000625400.525406
MagmaSTDT Red550400005006509250000625400.525406
MagmaSTDT Green550400005006509500000625400.525406
 
 
Manufactures are welcomed and suggested to get in contact with us to provide up to date information and get yours listed if not already in this program. Join the profiles group and let us know!
 
 
Duplicator D7 - 40 Microns
Duplicator D7 - 80 Microns
 

Comments

Already Registered? Login Here
No comments made yet. Be the first to submit a comment
"It's a collaborative effort and vision of Wanhao's Gary Chen, myself, and a growing list of enthusiastic people who want to further the enjoyment and viability in business, education, and other areas of interest with 3D printing by offering useful resources and support to achieve this goal."          ~Earl Miller

Copyright © 2017-2018 Earl Miller, Wanhao and Wanhao University. All Rights Reserved. No part of this site may be reproduced without express consent by the owners for their respective content. Wanhao University is a creative IP (intellectual property) soley owned by Earl Miller. 

header resin profiles bar2

Our resin profiles section is currently under construction. Values are not up to date.

We will announce completion and you will no longer see this message once they are finished.

whuniversitylogo8